Some people love the sound of the pure NOS mode , so we design the R-1 NOS that optimize the pure NOS mode , offer the pure musical sound .
The NOS design don’t need the main clock signal for working, that is the advantage of the NOS design to avoid the effect by the main clock’s jitter. In the R-1 NOS digital processor , we apply the zero delay technology that guarantee the data and clock exact synchronization for much reduce the jitter .
In the R-1 NOS design , we apply the galavanic isolator before the DA parts and analog parts , isolate the all digital inputs and the digital processor , that offer the better clean sound quality . 8 group built-in 24bit R-2R decoders and 4 native DSD decoders work with balanced mode, we apply the DA 7 modules that is an obvious upgrade than the last generation R-1 that apply the DA 8 modules. Using the latest designed discrete servo stabilized power supply to feed the digital circuits, the noise level is comparable to that of a battery, but without the dry and thin sound characteristics of it, and thus the product’s operating temperature is significantly lower than that of the previous model.
-> Analog circuit are pure class-A regulated power supply to provide best sound quality
-> In total8 groups PSU Class-A power supply in order to distribute the cleanest power to all components in the R1
-> Sample Rate indication is displayed
-> Remote Control
NOS (Non-Oversampling)
“NOS“ stands for “Non Oversampling“. In the 1970‘S, the first generation of the Compact Disc Player were released. By that time they all had Non Oversampling design.
Using NOS design, specs are ordinary because the limited signal bit depth affects THD and S/N. Despite the fact that quantization noise affects S/N, the R–1 NOS still achieves very low noise levels, much better than most tube amplifiers and turntables, and almost like a modern OS DAC.
To get better specs on paper, many designs use complex LC analog filter after the D/A conversion. But the LC filter usually does not have a flat response and the large phase shift it causes also affects sound quality considerably.
In 1980’s, oversampling and FIR filter were invented, and allowed improving sound quality compared to applying an LC filter. Good specs were obtained on paper, so this technology has been largely applied since that time.
However some people still like the sound of the “old” NOS design. They do not want the extra processing becuase without it does a better job preserving the original character of the sound. Do you trust your ears or do you need the best specifications?
If you are looking for great specifications, the NOS design is definitely not for you.
R-2R DISCRETE D/A CONVERSION
The R-2R DAC has become popular and was originally designed long time ago by MSB, and did not include the wonderful correction design of the modern MSB technology. In the High-End of the shelf (finished products) market, the R2R design is usually much more complex when outstanding performance is offered. Some manufacturers are using shift registers design to realize ladder compensation. A less complex, unfortunately also a less performing.
A far better design switches resistors in parallel mode; an ultra-fast FPGA chip controls and corrects the R2R ladder. The parallel design mode controls every bit respectively and therefore achieve unprecedented performance. (In parallel mode only 1 clock cycle is needed to output all data; serial design mode needs at minimum 8 up to 24 clock cycles) The parallel design is particularly complex, however when it is done properly it can correct every bit of the ladder. (Photo below shows a FPGA design with R2R ladder). With incredible speed and accuracy the R-28 will correct the unavoidable imperfections of the basic R2R ladder caused by tolerance of resistors; avoid glitches at ultra-high speed to deliver unrivaled musical performance.
DISCRETE ANALOGUE OUTPUT STAGES
The analog output stages are as important, they have a tremendous influence on the final sound quality. After d/a conversion by the R2R D/A modules the analogue signal is transported by fully discrete matched-transistor output stages; DC-coupled design with first class through-hole components. No SMD compon ents are applied in the analogue section. The high speed unique ACSS ((Audio-gd Current Signal System) output stages are non-feedback and current driven.
Audio-GD has developed an advanced current-driven amplifier technique. Also known as ACSS, Audio-GD Current System Signal. This special technique ensures that the signal travels a much shorter path and that ensures a more transparent, faster and more neutral reproduction. A similar technique is used by, for example, KRELL. The Current Conveyor technology mostly components are the current mirror. The Current Conveyor technology isn’t a new technology, at 1966 , professor K.C. Smith and A.S.Sedra publish the concept “current mode analogue circuits “ .
The DAC consist of a tuned low noise, low flux leakage, R-cores transformers. In total 65W power to supply all digital parts and the left and right analog boards. The DC power is distributed over several separate power regulators. Analogue stages are pure class A low noise shunts; fed by several group linear power supplies. Resulting in ultra-high speed and clean power for all individual parts.
SPECIFICATIONS | |
---|---|
DAC | R-2R NOS discrete ladder DAC |
Inputs | USB HDMI (I2S) Coaxial RCA SPDIF |
Outputs | Analogue RCA (Single Ended) Analogue XLR (Balanced) Analogue ACSS (Balanced) |
Digital input sensitivity | 0.5V pp (75Ω Coaxial), 19dB on Toslink optics |
Frequency Response | 20 to 20kHz |
Output Level | 5V (XLR), 2.5V (RCA), 2 mA (ACSS) |
Signal to noise ratio | 110dB |
Output impedance | 10Ω (RCA) |
USB and HDMI LVDS I2S | PCM 44.1kHz – 384kHz at 16-32bits |
USB and HDMI DSD | DSD64 to DSD512, 32bit max, sample rates: 44.1kHz – 384kHz |
Coaxial SPDIF input | 24bits max, sample rates: 44.1, 48, 88.2, 96,192kHz |
USB | Windows (requires driver), MAC and Linux |
Power Input | 230VAC / 115VAC |
Power Consumption | 12Watt |
Dimensions | 240 x 280 x 80mm |
Weight | 5kg |
Accessories | 1x USB cable 1x IEC power cable 1x Remote Control |
Maris –
Excellent price / quality ratio for Audio-GD products. I didn’t expect much, but when I turned on the Audio-GD R2R R1 DAC, I realized that this sound was significantly different from what I had heard from ~10 of my previous DACs, including the R2R. Space, stage, details – everything is here, nothing is smeared out of focus or exaggerated. Surprisingly good sound from Audio-GD, a brand I was not familiar with until now!
Norbert (verified owner) –
Sound is quite good right our of the box.
The fit and finish is overall excellent.
Only the RCA Output sockets are tight fit.
The connection finally worked and the R1 NOS DAC makes already nice sounding music. It will be interesting to experience how things develop during burn in…
Dan T. –
I was looking to upgrade my DAC and wanted to try a discrete R2R converter having been familar with both the sigma-delta and ladder types (I have a ESS9038 DAC as well as my trusted PCM1704 tube DAC). Although both types have their merits, I like the smooth presentation of the ladder DACs. Audio-gd has been on my short list for a long time, The product arrived safely and very fast (5 days to U.S.). I certainly have no problems highly recommending Magna Hifi
Daniel (verified owner) –
I ordered the silver version. Looks good.
I am very positive about the sound. Balanced sound; very convenient and easy listening.
The display is jumping all the time, I have put it to auto-dark mode to get rid of it.
Overall, 4 stars; for the sound, I would give it 5*!