HIGHLIGHTS
- Accusilicon 90/98M Edition
- High-End Digital USB (Amanero basiert) Konverter
- Unterstützung für Windows, Apple und Linux
- PCM-Abtastrate / DSD-Rate wird auf dem Display angezeigt
- 10MHz externer Master Clock Eingang
- Hochgeschwindigkeits-150Mbps-Isolator zum Trennen des USB-Eingangs
- FPGA verarbeitet Daten und Takt und unterstützt SQ-Upgrade-fähig
- R-Kern und lineare Ultra-Netzteil-Netzteile mit 13 Gruppen
- Unterstützt bis zu PCM384K / DSD512 und DoP 256 über S / PDIF.
- ACSS S/PDIF-Ausgangsdesign der 2. Generation (kompatibel mit Standard-S/PDIF-Eingängen)
DIGITALE EINGÄNGE
EINGANG S/PDIF
RCA 75 Ohm koaxialer Audioeingang (0.5VPP @ 75 Ohm) .
EINGANG 10MHz
Externer 10MHz Takteingang (0.3VPP -3VPP @ 50 Ohm)
USB-EINGANG
USB-Audioeingang? USB2.0/USB3.0)
UPDATE Port 10 Pins Port
Um den Altera Blaster anzuschließen und mit einem FPGA-Firmware-Update von Windows mit der Altera-Programmiersoftware fortzufahren. Diese Updates sind für die Verbesserung der Funktionalität und/oder der Klangqualität gedacht.
DIGITALE AUSGÄNGE
AES/EBU AUS
AES/EBU-Ausgangsanschluss 5VPP @ 110 Ohm)
S/PDIF AUS STD
Standard-Koaxialausgangsstecker mit integriertem Silberdraht-Trenntransformator. (0.5VPP @ 75 Ohm
S/PDIF AUS ACSS
Ausgabe mittels Stromübertragungstechnik über koaxial 0,5VPP @ 75 Ohm
Dieser Ausgang nutzt die koaxiale ACSS-Technologie der 2. Generation, die eine noch weiter reduzierte Signalverschlechterung und eine bessere Klangqualität über ein Koaxialkabel bietet.
IIS AUS
IIS-Signal über HDMI-Ausgang (3.3V LVDS @ 110 Ohm). Es kann nur mit DACs arbeiten, die genau die gleiche Pin-Definition verwenden. Es kann NICHT mit Mainstream-Audio- / Videogeräten mit HDMI-Eingängen funktionieren, und das Anschließen des DI an solche Geräte könnte es beschädigen, in diesem Fall deckt die Garantie die Reparaturen nicht ab.
CLK AUS
Ausgänge 256fs Haupttakt oder LRCK/WCLK (3.3V LVDS @ 50 Ohm). Vom Benutzer auswählbar .
SAUBERE ENERGIE
Ein abgestimmter, rauscharmer, flussarmer R-Cores-Transformator wird verwendet, um alle digitalen Teile zu versorgen. Die Gleichstromleistung wird auf mehrere separate Leistungsregler verteilt. Analoge Stufen sind reine rauscharme Shunts der Klasse A; Gespeist von 3 Gruppen linearen Netzteilen. Dies führt zu ultrahoher Geschwindigkeit und sauberer Leistung für alle Einzelteile.
SPECIFICATIONS
Spezifikationen können ohne vorherige Ankündigung zur Produktverbesserung geändert werden. | |
10M externe Uhr | 50? 0,3 Vpp – 3 Vpp |
S/PDIF-Eingang | 0,5 Vp-p @75 Ohm |
USB-Eingang | USB2.0 – USB3.0 |
HDMI-IIS-Ausgang | 3.3V LDVS @ 100 Ohm |
S/PDIF-Ausgabe | 0,5 Vp-p @75 Ohm |
AES/EBU-Ausgang | 5Vp-p @110 Ohm |
Taktausgang |
256fs Uhr |
Unterstützung Betriebssystem (USB) |
Windows, OSX, Linux, ISO |
Unterstützung der Probenahme | USB: 44.1kHz – 384kHz / 32Bit DSD64-512 Koaxialer Eingang: 44.1kHz – 192kHz / Dop Koaxialausgang: 44.1kHz – 192kHz |
Strombedarf | Version 1: 100-120V AC 50/60 Hz Version 2: 220-240V AC 50/60 Hz? |
Power Consumption | 8W |
Package Weight | Ca. 3. 5 KG |
Dimensions | B240 X L240 X H85 (MM, mit Füßen, Vollaluminium) |
Accessories | Kein Zubehör |
USB SUPPORT
Laden Sie USB Amanero-Treiber für Windows 10 herunter
Laden Sie USB Amanero Treiber für Windows 7 & 8 herunter
No drivers required for Linux and/or Mac OS
OSX 10.6+ and Linux with UAC2 compliant kernel
Microsoft Windows: KS/Wasapi/WDM/ASIO
Norman (Verifizierter Besitzer) –
Hello, i owned the DI20 for a year now and this piece of gear has been a tremendous change on my system which is not a HiFi system at the origin. I am making mastering for music production so the chain i own is very special, my monitors are ME GEITHAIN RL 901 K (https://sonicpurity.com.au/blog/2017/9/27/me-geithain-active-speakers) and my DAC is a MADA , AD-DA (from Fred FORSELL TECHNOLOGIES) one due its job in the studio. I just have a volume controler from him too and that ’s it to listen music. I am on TIDAL .
The DI20 has opened the sound in many ways, the treebles are crystal clear and the bass goes deeper, but the most significant is that it’s now tri-dimentionnal instead of being stereo !!! the sound is out of the speakers ! so this is really a beautiful DI to add to any system that need a new one or for somebody who is searching to get one ! Thn’x to Magnat Hifi !
Bedy (Verifizierter Besitzer) –
I’ve had a DI-20 for a while and now I can pronounce it completely because it has stood the test of time. First I hesitated whether to go for the almost double version at the DI-20HE price. Maybe in the future I will go for the „HE“ version. For now, this DI-20 is proving to be a substantial improvement in the sound quality of the Audio-gd R8 DAC (model 2021). When he had just arrived it only took me a few minutes to realize that it was a (big) step forward. I didn’t have much to compare, with the DI-20 the sound is much better in every way. The difference is so great that there is no need for too intense comparisons. From the first minute I realized and so it has remained in the audio system until today. I connect the DI-20 (which receives a signal from the PC via USB type A-B) with the R8 via HDMI (I2S). I’m not interested in other options. I listen to both PCM and DSD files. One more thing, although the sound improvement due to the DI-20 is really very big, the quality of the interconnect cables (USB, HDMI, signal) still matters as much, but also the quality of the USB output from the PC. Another advantage for the cheaper model DI-20, is cold, it does not heat up at all. The quality / price ratio is excellent for this model! 5 stars!
Marcel tiben (Verifizierter Besitzer) –
Echt de kers op de taart! Tijdje terug een r2r 11 dac gekocht bij magna hifi en nu uitgebreid met de DI-20. De di-20 staat nu een aantal dagen in m’n audio set. Absoluut een verbetering, geluid is er overall sterk op vooruit gegaan. ‚t klinkt nu zoals het hoort! En dank u wel Magna Hifi voor het advies en de erg vlotte service.
Jos Schellevis –
Really the icing on the cake! Bought a r2r 11 dac a while back at magna hifi and now expanded with the DI-20. The di-20 has been in my audio set for a few days now. Definitely an improvement, sound has improved overall. it now sounds as it should! And thank you Magna Hifi for the advice and the very smooth service.
Czech Buyer (Verifizierter Besitzer) –
The DI-20 is a very good interface for use with Audio-gd DACs. It runs cool to the touch, it is silent. It offers high rate data via ACSS and I2S (native Audio-gd format of course) and supports DSD as well as PCM.
It shares the same display and case color and height with other Audio-gd devices so it makes a handsome and harmonious match to your system.
The AES/EBU output does not work with one of my TASCAM devices but it does with another. For the price and if you don’t depend on AES/EBU (which will probably work with your device but may not) and you have an Audio-gd DAC then this is definitely worth buying. The HE is said to have even better sound quality but it does get hot which I did not want. So this unit at the price could be a very worthy compromise.
Jos is very responsive and friendly, and keeps you informed during the buying process. I recommend Magna Hifi as a top source of Audio-gd gear in Europe.
Support from Kingwa at Audio-gd is very good. Great gear, great people, what else can we ask for? :)
Norman (Verifizierter Besitzer) –
Love the DI-20………..works well with my Master 7 Singularity
Rene –
Every day I enjoy the quiet reproduction with silky soft refined highs and the beautiful warm glow and body in the midrange. The spatial representation is perfectly fine in terms of depth and width.