REVIEWS
BATTERIEBETRIEBEN
Das Design des Stromversorgungssystems wurde optimiert und die Audiosektion wurde von einem 7,5 F (7,5 Millionen uf) Superkondensator angetrieben . Während des Betriebs wird die SU6 über einen Adapter (im Lieferumfang enthalten) aufgeladen. Der SU6 wird intern vom Superkondensator angetrieben, um eine klarste Klangwiedergabe zu gewährleisten.
TAKTEINRICHTUNG
Integrierte CPLD-Pre-Shaping-Technologie, FPGA-basierte Quellsynchronisationstechnologie, die das isolierte I2S-Signal umformt und so den durch den Isolationschip verursachten additiven Jitter eliminiert. Der neu entwickelte FPGA-Algorithmus, eingebauter FIFO puffert die Daten und gibt dann aus, SPDIF-Ausgang wird von FPGA neu codiert, so dass der Koaxialausgang PCM 384K und DSD DOP128 am höchsten unterstützen kann. Durch die Verwendung des Hochleistungs-Femtosekunden-Quarzoszillators CCHD-957 von CRYSTEK mit dem selbst entwickelten System mit konstanter Temperatur und dem extrem rauscharmen Superkondensator-Stromversorgungssystem wird die kurzzeitige Stabilität der Uhr weiter verbessert.
Ursprüngliches Einzeltaktsystem, alle Schaltkreise der gesamten Maschine nehmen synchrones Taktdesign an, bei dem der USB-Takt von PLL synthetisiert wird, der vom Femtosekundentakt abgeleitet ist.
FUNKTIONEN
- Natives MacOS 10.6 und höher, die Verwendung des Systems kommt mit einem Treiber
- USB-Eingangsbuchse ist eine Standard-USB-B-Buchse, USB-Stromversorgungsbereich ist 4,5 V bis 5,1 V;
- BNC-Schnittstelle und Cinch-Schnittstelle Ausgang Standard S / PDI-Signal, der Pegel ist 550mV
- XLR-Schnittstellenausgang Standard AES / EBU-Signal, der Pegel beträgt 3,3 V
- Der Wordclock-Ausgang (WCLK) verwendet BNC-Schnittstelle, der Pegel ist TTL (keine Last), die Ausgangsimpedanz beträgt 75 Ohm
- DC POWER Eingangsbuchse verwendet DC2.1 Buchse, um 7,5 V -9 V DC-Eingang zu unterstützen (um das schnelle Aufladen von Superkondensator zu realisieren).
SPECIFICATIONS
SPECIFICATIONS | |
---|---|
Produkttyp | Digitale USB-Schnittstelle |
Unterstützte Abtastrate | PCM über SPDIF & AES / EBU: Bis zu 192kHz PCM via I2S & WCLK: Up to 384kHz DSD über SPDIF & AES / EBU: DSD64-DSD256 DoP DSD über I2S: natives DSD512 |
FPGA | Xilinx | |
Uhren | Der Femtosekunden-Quarzoszillator CCHD-957 von CRYSTEK |
Eingabe | 1x USB 2.0-B (Treiber zum Download auf diesem Blatt)) |
Ausgaben | – Koaxialer SPDIF (RCA) – Koaxialer SPDIF BNC – 2x HDMI I2S AUSGANG – RJ45 I2S AUSGANG – AES / EBU – Glasfaser (Toslink) – MCLK / WCK (Uhr) |
Betriebssystem-Kompatibilität | Windows XP, 7, 8, 10 – Installieren von Treibern erforderlich MacOS 10.6 und höher Linux mit Kernel UAC2 Android 4.2 und höher – Unterstützt OTG-Funktion |
Accessories | USB-Kabel, ein Netzteil (universell, AC100V-240V) und ein Netzkabel |
Dimensions | Breite: 233mm Tiefe mit Anschlüssen: 185.6mm Ohne Stecker: 170mm Höhe mit Beinen: 58,4mm Ohne Beine: 46,5 mm |
SCHNITTSTELLENSPEZIFIKATIONEN
EINGABE: USB
- USB-B-Buchse,
- USB DC Stromeingang: 4.5V-5.1V
EINGABE: GLEICHSTROM
- DC 5.5/2.1 Stecker,
- unterstützt 7.5V-9V DC Eingang, 1A (Schnelllade-Superkondensator 3A)
AUSGABE: S/PDIF BNC & RCA
- Ausgang: 550mV (an Standardlast angeschlossen)
- Ausgangsimpedanz: 75 Ohm
AUSGABE: AES / EBU, XLR
- Ausgang: 3,3 V (an Standardlast angeschlossen),
- Ausgangsimpedanz 110 Ohm
AUSGABE: Wordclock-Ausgang (WCLK), BNC-Anschluss.
- Ausgang: TTL (ohne Last),
- Ausgangsimpedanz 75 Ohm
AUSGABE: HDMI-I2S (2x).
- Nur Audio-I2S-Signalisierung.
- Die Ausgabe umfasst: MCLK, BCLK, LRCLK und SDATA.
- LVDS-Differenzstufe
- Ausgangsimpedanz 100 Ohm
- PIN13-15 der HDMI-Buchse ist das DSD_ON Signal, der hohe Pegel ist der I2S, der im DSD-Modus arbeitet, der Pegel ist LVTTL
- PIN18 ist ein 5V Triggerleistungsausgang (der Ausgangsstrom beträgt weniger als 20ma), der als Schnittstellensteckeranzeige verwendet werden kann
- Konfigurierbare Ausgangspins
AUSGABE: I2S-Signalisierung mit RJ45-I2S-Ausgang
- CMOS (5V) Single-Ended-Signal,
- Niederohmiger Ausgang,
- Ausgabedaten MCLK, BCLK, LRCLK, SDATA
AUSGABE: Lichtwellenleiter
- Gibt das optische Standardsignal aus
Ross (Verifizierter Besitzer) –
Seems to work well with my Wireworld Silver Sphere HDMI cable and my Holo May KTE.
My whole system sounds ‘right’ now in a way I’ve never heard before. It’s a feeling that’s similar across all input formats and musical genres. Excellent soundstage, neutral frequency response, realistic timbre, excellent micro detail, good low end drive and the blackest of black backgrounds.
Tom (Verifizierter Besitzer) –
The Singxer su6 tagled your equipment up to a much higher level. Especially if you’re playing with a Nucleus, Nuc or Rhein z1 you certainly have to meet this sensational SU6 . Stronly recommended i’ve you like timing; rythm and refined heights. I’ts you’re number One choice.
Michael Christ (Verifizierter Besitzer) –
Had a great listening evening yesterday. To be honest, the sound with the Singxer SU-6 (coming from my Vortexbox Audioserver premium xl) is breath taking. I am really surprised how it works that way and why others are (probably) do not include this technology …. in addition, I have tried several components and settings, nothing works like the singxer …. Great weekend! Michael
Daniel (Verifizierter Besitzer) –
Very pleased with the SU6! It has a silky and refined heights, great details and controlled bass with the right amount of tightness. Midrange is rich and very nice textured.
Mike (Verifizierter Besitzer) –
Have been enjoying the Singxer SU6 for about one month now and am very happy with the sound.
Am still in the „running in“ phase but even now the system is sounding both more musical & much more richly detailed.
Sjoerd (Verifizierter Besitzer) –
Thanks! Sounds a lot nicer indeed! Wow! Thank you for your advice, very happy.
Gerard (Verifizierter Besitzer) –
After ordering, delivery was fast, because it was on stock. My MicroRendo has USB out and I needed a converter, which has data simultaneously available in AES, SPDIF (RCA and optical), I2S (HDMI, RJ45) format. Instead of the included PSU, I powered it with a SBooster 9V lineair power supply and the USB port with a SBooster 5V lineair power supply. I use two DACs simultaneously, a Sabre DAC for the loudspeakers, a NOS DAC for the headphone. This is the best sound, I can get with my DAC’s, even Spotify sounds like near_CD quality. This is a DDC and just a link in your whole equipment chain, so the final sound depends on the rest of your installation. But as they say „garbage in, garbage out“, the source quality is the start of the chain.
Fred –
The Singxer SU6 is superior in imaging, texture, bass definition, dynamics and detail.
Christophe Adam –
WoW – I am really impressed !
Much better sound with Singxer SU6. Even though it has been already great now it is really better. I am happy!
Many thanks
Adam