HoloAudio – Titanis 300mA – Active USB processor

Standard 300mA Version

Standard version, output current is 300 mA, which is good for most of the USB device interfaces.

Advanced version, output current is 800 mA, which is good for all high current USB device interfaces

+

Out of stock

Digital USB Converters (DDC)

HoloAudio – Titanis 800mA – Advanced Active USB processor

€137,-   ( €113,22 excl. VAT)

Rated 5.00 out of 5

Out of stock

The two main functions of Titanis.

Regeneration of USB power. Power from the computer USB ports are very noisy with a level higher than several mV. Titanis inverts and processes power from the USB source. The regenerated power noise level is only 8 uV, rendering the Noise level reduced by about 1/1000th.

Rebuilding the signal from the USB port. In the computer, the signal consists of a large amount of interference and jitter due to the complicated EM environment and power supply conditions. Titanis receives the signal from USB and puts it in a local buffer, with the use of a local high quality clock, regenerates the USB signal and sends it to output.

Please place Titanis close to the computer, the shorter the USB connection cable between Titanis and computer is better. For the best optimization plug the Titanis directly into the computer USB port. Includes 10cm USB extension cable in the box.

Titanis does not require device driver, however some devices may need to reinstall a device driver after connecting to Titanis.

All USB devices can be connect through Titanis, e.g. mouse and keyboard… etc, it can enhance PCHIFI system performance.