The main job of UIP-1 Pro is to clean the provided input signal. It rectifies the signal by removing the jitter and greatly enhances the signal transmission by removing noise introduced by the USB power and electromagnetic interferences. It easily isolates the signal from front-end complex noises. The isolated signal is then reformed into the USB controller and prepared for output via the USB output port.
USB 2.0
The UIP-1 Pro is fully compatible with USB 2.0 ports. It also has hot-plug functionality and supports USB1.0 and USB1.1 ports as well. With Advanced technology and design, UIP-1 Pro has ESD protection up to 15000 Volts of IEC air-gap discharge. The device has a USB Type-B input socket and a USB input with a 5V power supply. The high-speed isolator supports a USB transmission rate of up to 480 Mbps and an isolation voltage of up to 2kvRMS. It has a standard USB-B port for signal input and a standard USB-A female socket for signal output. The device takes DC6-9V power input.
USB ISOLATION
The provides USB signal is completely isolated including USB power and ground circuits. It easily isolates the signal from front-end complex noises and electromagnetic interferences. The isolated signal is then reformed into the USB controller. It removes a lot of jitters as well.
USB-A OUTPUT
The isolated signal can be taken out via the USB Type-A output port. It has a maximum output current of up to 1A with a low-noise design of 20uV. Your sound listening experience gets a major boost with clean signal transmission to the source chain.
USB INPUT PROTECTION
With Advanced technology and design, UIP-1 Pro has ESD protection up to 15000 Volts of IEC air-gap discharge. The device has a USB Type-B input socket and a USB input with a 5V power supply. The high-speed isolator supports a USB transmission rate of up to 480 Mbps and an isolation voltage of up to 2kvRMS.
| SPECIFICATIONS | |
|---|---|
| Product type | USB isolator |
| Input | 1* USB-B 2.0 |
| Output | 1* USB-A 2.0 |
| Supported USB standards | 1.0 1.1 2.0 |
| Max bandwidth | 480Mpbs |
| Output current | 1V |
| Isolation voltage | 2kV RMS |
| Output noise | 20µV |
| Plug and play | Yes |
| GENERAL | |
|---|---|
| Dimensions | 112 x 72 x 26mm |
| Color | Black |
| Gross weight | 0.45kg |
| Net weight | 0.2kg |
| Package | 1* Singxer UIP-1 Pro 1* Male USB-A to male USB-B cable 1x Power adapter |
Kris (proprietario verificato) –
This device sounds really great to me, a big improvement, much more than the SU2 alone! But in combination it is really nice