DI20HE Measurements by GoldenSound
Dutch Review by AudioEnzo
https://www.audioenzo.nl/audio-gd-di20he/
HIGHLIGHTS
- High-End Digital USB (Amanero based) Converter
- S/PDIF Reclocker (S/PDIF input available)
- Support for Windows, Apple and Linux
- PCM Sample rate / DSD rate shown on display
- 10MHz external Master Clock input
- High speed 150Mbps isolator to separate USB input
- FPGA processes data and clock, and support SQ upgrade-able
- R core and 13 groups ultra PSU linear power supplies
- Support up to PCM384K / DSD512 and DoP 256 over S/PDIF.
- 2nd generation ACSS S/PDIF output design (compatible with standard S/PDIF inputs)
DIGITAL INPUTS
INPUT S/PDIF
RCA 75 Ohm coaxial audio input (0.5VPP @ 75 Ohm) .
INPUT 10MHz
External 10MHz clock input (0.3VPP -3VPP @ 50 Ohm)
INPUT USB
USB audio input?USB2.0/USB3.0)
UPDATE PORT 10 pins port
To connect the Altera Blaster and proceed with an FPGA firmware update from Windows, using the Altera programming software. These updates are meant for upgrading the functionality and/or sound quality .
DIGITAL OUTPUTS
AES/EBU OUT
AES/EBU output connector?5VPP @ 110 Ohm)
S/PDIF OUT STD
Standard coaxial output connector, with built-in silver wire isolation transformer. (0.5VPP @ 75 Ohm
S/PDIF OUT ACSS
Output using current transmission technology over coaxial 0.5VPP @ 75 Ohm
This output applies the 2nd generation coaxial ACSS technology, which offers even further reduced signal degradation and better sound quality over a coaxial cable .
IIS OUT
IIS signal over HDMI output (3.3V LVDS @ 110 Ohm). It only can work with DACs with an HDMI input supporting I2S audio signals HDMI. It can NOT work with mainstream audio/video devices featuring HDMI inputs.
CLK OUT
Outputs 256fs main clock or LRCK/WCLK (3.3V LVDS @ 50 Ohm) . User selectable .
REGENERATIVE POWER SUPPLY
Integrated regenerative power supply is a proprietary electric generator built into the unit to eliminate noise from main power and deliver ultra-low noise and clean AC wave to feed the DDC. It will regenerate the main power and block noise from the power line , this will lead to most neutral and analog sound you can imagine.
A discrete balanced regenerative wave generator produces the new ultra-low noise wave form at 400Hz. The 400Hz frequency was chosen because they have better efficiency compared to traditional 50Hz and at this frequency, 400Hz, it will boost the sound to reproduce real and pleasant analog sound. The balanced gain amps with powerful output stages are driving the regenerative transformers to produce the extreme clean AC power. The extreme regenerated clean AC power is send to separate class A PSUs power supplies for both left and right channel.
Specifications might subject to change without prior notice for product improvement. | |
10M external clock | 50MHz 0.3Vpp- 3Vpp |
S/Pdif input | 0.5 Vp-p @75 Ohms |
USB input | USB2.0 – USB3.0 |
HDMI-IIS output | 3.3V LDVS @ 100 ohms |
S/Pdif output | 0.5 Vp-p @75 Ohms |
AES/EBU output | 5Vp-p @110 ohms |
Clock output |
256fs clock |
Support operate system (USB) |
Windows, OSX, Linux, ISO |
Support sampling | USB : 44.1kHz – 384kHz /32Bit DSD64-512 Coaxial input: 44.1kHz – 192kHz / Dop Coaxial output: 44.1kHz – 192kHz |
Power Requirement | Version 1: 100-120V AC 50/60 Hz Version 2: 220-240V AC 50/60 Hz? |
Power Consumption | 20W |
Package Weight | Approximately 5KG |
Dimensions | W240 X L240 X H85 (MM, with feet, Fully aluminium ) |
Accessories | USB Cable USB Blaster (Firmware Updates) |
Recensioni
Ancora non ci sono recensioni.