?unique=bcad5fe)
?unique=bcad5fe)
Audio-GD – R27RE – Regeneratieve PSU Gebalanceerde R2R PCM / DxD / DSD – Voor- en hoofdtelefoonversterker
The R-27RE Audio-GD version is a discrete balanced R2-2R ladder DAC with an integrated class A balanced headphone amplifier and a class A balanced pre-amplifier. Integrated builtin Regenerative Power Supply for cleanest power. All elements are built with the greatest care and classical discrete design with today’s capabilities and standards..
Unique R2R correction technology. Digital signal processing driven by high-speed FPGA supporting FIFO buffering and re-clocking. Software up-gradable design enables future new capabilities and improvements.
Additional glass top cover & remote control included
| Merk: Audio-GD |
| Product Type: Amplifiers with DAC |
Audio-GD R27-RE HIGHLIGHTS
- Regenerative Power Supply built-in
- USB fully integrated and Isolated with internal FPGA deriving clocks from Accusilicon’s (similar to DI20 architecture)
- I2S HDMI isolated input
- IN2 coaxial input accepts external 10MHz clock input ( 75 ohms )
- Firmware up gradable design
- True balanced design, discrete push-pull R2R DAC design
- Improved clock timing of internal master clock regeneration.
- Discrete analogue output stages
- DC coupled design (No capacitors in signal path)
- Non- feedback ACSS analogue output control
Multi-Functional Display
A new display type has been added to the R8 mk3. Both input and sample rate are now being displayed. (2 line multi-function display)
Firmware Update Port
On the back-panel of the unit an update port is available to quickly update the firmware using the USB Blaster (included).
FPGA Signal Processing
The internal hardware design is fully controlled by complex software. Software in the FPGA can easily be upgraded offering new capabilities or improve the performance of the device without replacing any hardware.
MAGNA HIFI R2R (SILVER) UPGRADE
Magna Hifi, have been working for months on possible improvements for Audio-GD R2R DACs. Because we have gained a lot of experience with the Mano ULTRA streamer and other successful modifications in the digital area. We had certain ideas about how things could be improved and sound better.
AND IT DOES! Read more…
TECHNICAL SPECIFICATIONS
| specifications tested by OS8 mode and already through sound tuned, we always improve for better real like , musical and analog sound ,improvement may result in changes in specifications and design without notice. | ||
| S/N Ratio | >120DB | |
| THD+N | <0.03% | |
| Gain | L mode : +13DBH mode : +26DB | |
| Channels imbalance | < 0.05DB | |
| Frequency Breadth (Whole unit) | 20Hz – 20KHz (< – 0.25DB)20Hz – 150KHz (< – 3DB) | |
| Output Level | Preamp Variable output : 18V max (XLR) / 9V max (RCA)DAC Fixed output : 2-5 V (XLR) /1-2.5V ( RCA) | |
| Headphone amp Output Power (Balanced class A ) | 25 ohm: 15W 40 ohm: 10W 100 ohm: 4W 300 ohm: 1350mW | |
| Headphone amp Output Power (Single-ended class A ) | 25 ohm: 4W40 ohm: 2500mW 100 ohm: 1000mW 300 ohm: 350mW | |
| Digital Input Sensitivity | 0.4-1 Vp-p(75 Ohms, Coaxial)19 dBm (Optical) | |
| XLR input impedance | XLR : 94K ohm | |
| Support Operate Systems (USB) | Windows, OSX, Linux, ISO | |
| Support Sampling | USB & IIS : 44.1kHz – 384kHz /32Bit DSD64-512AES/EBU and Coaxial mode: 44.1kHz – 192kHzOptical mode: 44.1kHz – 96kHz | |
| Power Requirement | 1 Version 100-120V AC 50/60 Hz2 Version 220-240V AC 50/60 Hz | |
| Power Consumption | 42W | |
| Package Weight | Approximately 12kg | |
| Dimensions | W430 X L445 X H80 (mm) | |
| Accessories | AC power cord X1 USB cable X1 Metal remote X1 |
Comparison table R27 Series
Model | R27 HE | R27 RE | R27 mk2 |
| Headphone Amp | Yes | Yes | Yes |
| Preamplifier function | Yes | Yes | Yes |
| DAC Type | Discrete R2R | Discrete R2R | Discrete R2R |
| Amplifier Type | Discrete Balanced | Discrete Balanced | Discrete Balanced |
| Regenerative Power Supply | Yes | Yes | No |
| Step Down transformers | Yes | No | Yes |
| Gain Modes | L mode : +13DBH mode : +26DB | L mode : +13DBH mode : +26DB | L mode : +13DBH mode : +26DB |
| Preamp Variable output | 20V Balanced | 18V Balanced | 18V Balanced |
| Headpone output | 25 ohm: 15W | 25 ohm: 10W | 25 ohm: 15W |
| Master Clock Input | Yes, 50 or 75 ohm | Yes, 50 or 75 ohm | Yes, 50 or 75 ohm |
| Remote Control | Aluminium Remote | Aluminium Remote | Aluminium Remote |
| Color Enclosure | Silver / Black | Silver / Black | Silver / Black |
| Size | W430 X L480 X H123 | W430 X L445 X H80 | W430 X L445 X H80 |
| Weight | 24kg | 12kg | 12kg |
| Power Consumption | 53Watt | 42Watt | 32Watt |
R-2R LADDER DAC
The R-2R DAC has become popular and was originally designed long time ago by MSB, and did not include the wonderful correction design of the modern MSB technology. In the High-End of the shelf (finished products) market, the R2R design is usually much more complex when outstanding performance is offered. Some manufacturers are using shift registers design to realize ladder compensation. A less complex, unfortunately also a less performing.
A far better design switches resistors in parallel mode; an ultra-fast FPGA chip controls and corrects the R2R ladder. The parallel design mode controls every bit respectively and therefore achieve unprecedented performance. (In parallel mode only 1 clock cycle is needed to output all data; serial design mode needs at minimum 8 up to 24 clock cycles) The parallel design is particularly complex, however when it is done properly it can correct every bit of the ladder. (Photo below shows a FPGA design with R2R ladder). With incredible speed and accuracy the R-28 will correct the unavoidable imperfections of the basic R2R ladder caused by tolerance of resistors; avoid glitches at ultra-high speed to deliver unrivaled musical performance.
ANALOGUE OUTPUT STAGES
The analog output stages are as important, they have a tremendous influence on the final sound quality. After d/a conversion by the R2R D/A modules the analogue signal is transported by fully discrete matched-transistor output stages; DC-coupled design with first class through-hole components. No SMD components are applied in the analogue section. The high speed unique ACSS ((Audio-gd Current Signal System) output stages are non-feedback and current driven. Unique performance because almost all other designs need to convert the signal multiple times from and to current and/or voltage, resulting in less detailed and less transparent sound-stage The output buffers are single ended FET; two stages in parallel to reach very low output impedance. All output stages are in pure class A without (negative) feedback to achieve purest and a real live sound reproduction. The 4 OPA op-amp’s are DC servos, this way no coupling-capacitors are needed and DC output is automatically biased. The listener will be presented a strikingly transparent and neutral sound.
HIGH PRECISION VOLUME CONTROL
Volume control consist of relay-controlled attenuators. Fully-independent, fully-balanced stereo volume controls. The volume controls feature consist of high-precision 0.05% tolerance film resistors and golden contact relays. Buffered inputs and outputs.There 4 channels volume boards are built in the unit to achieve ultimate balanced volume control. They are controlled by a digital signal controlling the high quality relays switching the precision resistors in analog area.
REGENERATIVE POWER SUPPLY
An integrated regenerative power supply is a proprietary electric generator built into the unit to avoid any noise from main power and deliver ultra-low noise and clean AC wave to feed the preamp. It will regenerate the main power and block noise from the power line, this way the preamp is able to reproduce the most neutral and analog sound you can imagine. First a transformer converts main voltage. DC conversion is done by class A PSUs power supplies.
A discrete balanced regenerative wave generator produces the new ultra-low noise wave form at 400Hz. The 400Hz frequency was chosen because they have better efficiency compared to traditional 50Hz and at this frequency, 400Hz, it will boost the sound to reproduce real and pleasant analog sound. The balanced gain amps with powerful output stages are driving the regenerative transformers to produce the extreme clean AC power. The extreme regenerated clean AC power is send to separate class A PSUs power supplies for both left and right channel. The discrete class-A DC power supply with high input impedance will avoid any noise and allow the amplifier stages to have low output impedance at very high speed and linear at frequency spectrum.
Unique Items
To buy unique pieces is to buy a piece of the artist: His passion put in the execution of the object, his hours of reflexion, his dexterity... It is a committed, ethical act, which encourages a responsible and direct economy.
Tailored advice
Whether it is to help you see clearly in a project, to confirm a choice or when you have no idea about the layout of your interior, our advisers are there to accompany you throughout your project.
For the whole Family
Every week our shop receive new products. Some are only on sale for a limited period of time.
First Feature
Tell what's the value for the
customer for this feature.
Second Feature
Write what the customer would like to know,
not what you want to show.
Third Feature
A small explanation of this great
feature, in clear words.
First Feature
Tell what's the value for the
customer for this feature.
Second Feature
Write what the customer would like to know,
not what you want to show.
Third Feature
A small explanation of this great
feature, in clear words.
WORLDWIDE SHIPPING
IN STOCK* = Immediately ready for shipping, delivery time 1-5 days within European Union.We aim to register your order with the carrier the same day.
* Some product options contain modifications. Shipping may then take 2 to 5 days longer.
Services and delivery options are automatically calculated at checkout.
We ship with UPS, Fedex, DPD, DHL. (You can specify a preferred shipper in order note**)
Customers outside European Union pay price excluding VAT (Custom fees maybe applicable)
** In some situations a preferred shipping company might involve additional costs. We will contact you in such case.
PAYMENT OPTIONS
We accept many payment methods, including major credit cards (Visa, MasterCard, Amex), PayPal and Apple Pay and many other’s.In some countries we support Klarna slice-it or 3 – instalments
When you would like to pay with credit card above 5000 EURO we make 2 or more instalments. (Contact us p